UNTOUCHABLE® WITH SCUFF RESISTANT TECHNOLOGY™ (SRT) IS A LOW ODOR BLACK HEEL MARK RESISTANT FLOOR FINISH. AN EXCEPTIONAL CHOICE FOR THOSE WHO WANT THE HIGHEST GLOSS AND WEAR WITH THE LEAST AMOUNT OF LABOR. UNTOUCHABLE® WITH SRT™ IS NONSCUFFING DURABLE AND DETERGENT RESISTANT. IT MAINTAINS ITS HIGH GLOSS WITH MINIMAL BURNISHING SAVING LABOR COSTS. EXCELLENT LEVELING AND LOW ODOR MAKE IT EASY TO APPLY. DIRECTIONS FOR USE RECOMMENDED FOR USE ON ALL TYPES OF RESILIENT TILE FLOORING AND PROPERLY PREPARED HARD SURFACES. RESTORATIVE MAINTENANCE COMPLETELY REMOVE ALL OLD WAX FINISH AND SOIL FROM FLOOR SURFACE FOLLOWING STRIP PROCEDURE INSTRUCTIONS ON BETCO® STRIPPER LABEL. FLOOR SURFACE MUST BE CLEAN DRY AND FREE OF RESIDUE BEFORE FINISH IS APPLIED. RINSE WITH CLEAN WATER IF NECESSARY. APPLY FINISH IN UNIFORM THIN TO MEDIUM COATS USING A CLEAN SYNTHETIC FINISH MOP MICROFIBER MOP OR APPLICATOR SYSTEM. ALLOW EACH COAT TO DRY THOROUGHLY BEFORE APPLYING ADDITIONAL COATS USUALLY 20 - 30 MINUTES. ELEVATED TEMPERATURES HEAVY COATS AND HUMIDITY MAY EXTEND DRY TIME. A MINIMUM OF 4 COATS OF FINISH IS RECOMMENDED. NOTE THIS PRODUCT IS A SELF-SEALING FINISH HOWEVER IF TILE IS OLD WORN OR POROUS INITIALLY APPLYING 1 - 2 COATS OF A BETCO® SEALER WILL ENHANCE GLOSS AND LONG TERM PERFORMANCE. ROUTINE MAINTENANCE SWEEP LARGE DEBRIS AND DUST MOP. DAMP MOP OR AUTOMATIC SCRUB USING A BETCO® FLOOR CLEANER. BUFF OR BURNISH THE FLOOR TO ENHANCE GLOSS AS NEEDED. USE BETCO® ONE STEP HIGH SPEED CLEANER/RESTORER TO CONDITION THE FLOOR AND EXTEND THE TIME BETWEEN TOP SCRUB AND RECOATING. INTERIM MAINTENANCE SWEEP LARGE DEBRIS AND DUST MOP. TOP SCRUB THE FLOOR USING DAILY SCRUB SC AND MAROON PAD TO REMOVE THE TOP SOILED LAYERS OF FINISH. FLOOR SURFACE MUST BE CLEAN DRY AND FREE OF RESIDUE BEFORE FINISH IS APPLIED. APPLY 1 - 2 COATS OF FINISH AS DIRECTED ABOVE. PLEASE RECYCLE EMPTY CONTAINERS. NOTE SLIP RESISTANCE MEETS OR EXCEEDS STANDARD (ASTM D 20
My Locations
View Delivery Information
Newsletter Sign Up
