0 CART
items in your cartto quote
Ooops no items were found.
Try something else.
Ok
Loading…
To cart
Quote Me
0
IKO International

IKO Machined Type Needle Roller Bearing METRIC TAF101716 10mm Bore 17mm OD

Category Needle Roller Bearings
B1498868
IKO International

IKO Machined Type Needle Roller Bearing METRIC TAF101716 10mm Bore 17mm OD

Locations:
Item Code: B1498868
Category Needle Roller Bearings
Manufacturer IKO International

Description

IKO MACHINED TYPE NEEDLE ROLLER BEARING CONSISTS OF SOLID OUTER RING ROLLERS AND RETAINER WITHOUT INNER RING. THEY ARE WITH LOW SECTIONAL HEIGHT LARGE LOAD RATINGS AND RIGIDITY AND COME WITH NO SEALS. PROPER LUBRICANT MUST BE APPLIED WHEN THEY ARE USED AS PREPACKED GREASE IS NOT PROVIDED FOR THESE SERIES. GTR SERIES ARE FULL COMPLIMENT BEARINGS WITH MALLET-SHAPED ROLLERS THAT ARE GUIDED BY GUIDE RAIL AND GROOVE TO MINIMIZE SKEWING. THESE BEARINGS ARE SUITABLE FOR APPLICATIONS WITH HEAVY LOADS SHOCK LOADS OR OSCILLATING MOTIONS. MACHINED TYPE NEEDLE ROLLER BEARINGS ARE GENERALLY USED WITH SHAFTS WITHOUT INNER RINGS. 0.2MRA OR LESS SHAFT SURFACE FINISH AND HRC 58 TO 64 SHAFT HARDNESS ARE RECOMMENDED. WHEN THESE REQUIREMENTS ARE NOT POSSIBLE USE OF IKO INNER RINGS ARE RECOMMENDED.

Specifications

UNSPSC Code

31171512

Weight

0.03lb

Height

0.71in

Width

0.75in

Length

0.75in

Brand

IKO International

Category

Needle Roller Bearings

Call for price
Add to favorites
Compare
IKO International

IKO Machined Type Needle Roller Bearing METRIC TAF101716 10mm Bore 17mm OD

Category Needle Roller Bearings
B1498868
IKO International

IKO Machined Type Needle Roller Bearing METRIC TAF101716 10mm Bore 17mm OD

Locations:
Item Code: B1498868
Category Needle Roller Bearings
Manufacturer IKO International

Description

IKO MACHINED TYPE NEEDLE ROLLER BEARING CONSISTS OF SOLID OUTER RING ROLLERS AND RETAINER WITHOUT INNER RING. THEY ARE WITH LOW SECTIONAL HEIGHT LARGE LOAD RATINGS AND RIGIDITY AND COME WITH NO SEALS. PROPER LUBRICANT MUST BE APPLIED WHEN THEY ARE USED AS PREPACKED GREASE IS NOT PROVIDED FOR THESE SERIES. GTR SERIES ARE FULL COMPLIMENT BEARINGS WITH MALLET-SHAPED ROLLERS THAT ARE GUIDED BY GUIDE RAIL AND GROOVE TO MINIMIZE SKEWING. THESE BEARINGS ARE SUITABLE FOR APPLICATIONS WITH HEAVY LOADS SHOCK LOADS OR OSCILLATING MOTIONS. MACHINED TYPE NEEDLE ROLLER BEARINGS ARE GENERALLY USED WITH SHAFTS WITHOUT INNER RINGS. 0.2MRA OR LESS SHAFT SURFACE FINISH AND HRC 58 TO 64 SHAFT HARDNESS ARE RECOMMENDED. WHEN THESE REQUIREMENTS ARE NOT POSSIBLE USE OF IKO INNER RINGS ARE RECOMMENDED.

Specifications

UNSPSC Code

31171512

Weight

0.03lb

Height

0.71in

Width

0.75in

Length

0.75in

Brand

IKO International

Category

Needle Roller Bearings

Call for price
Add to favorites
Compare
SEARCH ×