0
Tempco Electric Heater Corp.

Tempco Finned Strip Heater CSF00090 240V T4 23-3/4""L 2200W

Category Strip Heaters
B382853
Tempco Electric Heater Corp.

Tempco Finned Strip Heater CSF00090 240V T4 23-3/4""L 2200W

Item Code: B382853
Freight
Category Strip Heaters
Manufacturer Tempco Electric Heater Corp.

Description

THIS TEMPCO FINNED STRIP HEATER IS USED FOR BOTH FORCED (MOUNTED IN A DUCT) AND NATURAL CONVECTION AIR HEATING (MOUNTED AT THE BOTTOM OF CABINET TYPE OVENS). THE FINNED STRIP HEATER'S BASIC DESIGN CONSISTS OF A HELICALLY WOUND RESISTANCE COIL PLACED IN A SPECIALLY DESIGNED CERAMIC INSULATOR. THE RESISTANCE COIL IS MECHANICALLY CONNECTED TO SCREW TERMINAL FOR POSITIVE CONNECTION. STAINLESS STEEL RECTANGULAR TUBING IS USED TO HOUSE THE HEATER ASSEMBLY. ALL REMAINING VOIDS ARE FILLED WITH HIGH PURITY MAGNESIUM OXIDE TO INCREASE THERMAL CONDUCTIVITY AND DIELECTRIC STRENGTH. NICKEL PLATED STEEL FINS ARE MOUNTED TO THE RECTANGULAR TUBING. THE FINS HAVE BEEN SPECIALLY DESIGNED TO PROVIDE MAXIMUM SURFACE CONTACT FOR GOOD HEAT DISSIPATION INTO THE FINNED CROSS SECTIONS THUS RESULTING IN RAPID HEAT TRANSFER TO THE AIR.

Specifications

UNSPSC Code

40101821

Weight

3.05lb

Height

1.5in

Width

2in

Length

24.25in

Brand

Tempco Electric Heater Corp.

Call for price
Add to favorites
Compare
Tempco Electric Heater Corp.

Tempco Finned Strip Heater CSF00090 240V T4 23-3/4""L 2200W

Category Strip Heaters
B382853
Tempco Electric Heater Corp.

Tempco Finned Strip Heater CSF00090 240V T4 23-3/4""L 2200W

Item Code: B382853
Freight
Category Strip Heaters
Manufacturer Tempco Electric Heater Corp.

Description

THIS TEMPCO FINNED STRIP HEATER IS USED FOR BOTH FORCED (MOUNTED IN A DUCT) AND NATURAL CONVECTION AIR HEATING (MOUNTED AT THE BOTTOM OF CABINET TYPE OVENS). THE FINNED STRIP HEATER'S BASIC DESIGN CONSISTS OF A HELICALLY WOUND RESISTANCE COIL PLACED IN A SPECIALLY DESIGNED CERAMIC INSULATOR. THE RESISTANCE COIL IS MECHANICALLY CONNECTED TO SCREW TERMINAL FOR POSITIVE CONNECTION. STAINLESS STEEL RECTANGULAR TUBING IS USED TO HOUSE THE HEATER ASSEMBLY. ALL REMAINING VOIDS ARE FILLED WITH HIGH PURITY MAGNESIUM OXIDE TO INCREASE THERMAL CONDUCTIVITY AND DIELECTRIC STRENGTH. NICKEL PLATED STEEL FINS ARE MOUNTED TO THE RECTANGULAR TUBING. THE FINS HAVE BEEN SPECIALLY DESIGNED TO PROVIDE MAXIMUM SURFACE CONTACT FOR GOOD HEAT DISSIPATION INTO THE FINNED CROSS SECTIONS THUS RESULTING IN RAPID HEAT TRANSFER TO THE AIR.

Specifications

UNSPSC Code

40101821

Weight

3.05lb

Height

1.5in

Width

2in

Length

24.25in

Brand

Tempco Electric Heater Corp.

Call for price
Add to favorites
Compare
SEARCH ×